Hioki CM7290, Instruction Manual, Page: 7 / 80

3
Measurement Flowchart
Measurement Flowchart
When performing standalone measurement
Installation and connection
Inspect prior to use (p. 33).
Connect the sensor to the unit (p. 26).
You will need:
A sensor equipped with a Hioki PL14
connector (optional)
Connect the unit to the power supply (p. 27).
You will need:
LR6 alkaline battery (AA) ×2
or an AC adapter
See “Options” (p. 2).
Turn the power on (p. 30).
If being driven by an AC adapter, the unit is automatically powered on.
Measuring
Execute zero adjustment (p. 16).
「シールド線は挟まない」の説明を
記載する/しないは製品ごと技術に確認する
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
OK NO NO NO
OK NO NO NO
「シールド線は挟まない」の説明を
記載する/しないは製品ごと技術に確認する
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
OK NO NO NO
OK NO NO NO
Zero
adjustment
Measure-
ment modes
Zero adjustment is unavailable for
sensors dedicated for AC measurement.
Connect the sensor to the conductor to
be measured (p. 34).
Select the measurement mode (p. 16).
Check the measured values.
Ending
Disconnect the sensor from the
conductor measured, and turn off the
unit’s power supply.
10
9
8
7
6
5
4
3
2
1
Appx.
Ind.