Hioki 9593-03, Instruction Manual

Page: 28 / 66

5.3 Particular Commands
*CLS
■
Clears the status byte register and the event registers.
Syntax *CLS
Function • Clears all the event registers (SESR, ESRO) associated with the bits of the
status byte register. Accordingly, also clears the status byte register.
• This has no effect upon the output queue.
Error If the data parameters are set after this command, a command error occurs.
*ESR?
■
Queries the contents of the standard event status register (SESR).
Syntax *ESR?
Function • Returns the contents of the standard event status register (SESR) as a
numerical value in NRl format between O and 255, and then clears standard
event status register.
• No header is affixed to the response message.
Example Response 32
Bit 5 of SESR has been set to 1.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
Standard event status register (SESR)
Error If the response message is longer than 300 bytes, a query error is generated.
*IDN?
■
Queries manufacturer's name, model name, and software version.
Syntax *IDN?
Function • The response consists of the name of the manufacturer of the unit, the model
name, and the software version.
• No header is affixed to the response message.
First field Manufacturer's name
Second field Model name
Third field Serial number (Not used - always zero)
Fourth field Software version
Example Response HIOKl,3157,0,V01.01
Error If the response message is longer than 300 bytes, a query error is generated.
23
5.3 Particular Commands
HIOKI 9593C981-01