Hioki 9593-02, Manual, Page: 68 / 92

62
────────────────────────────────────────────────────
7.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:SYSTem:OPTion:PRINter
■ Sets the printer output function.
:SYSTem:OPTion:PRINter?
■
Queries the printer output function.
Syntax :SYSTem:OPTion:PRINter
_<data>
<data> Numerical data in NR1 format between 0 and 2
Function
Sets the printer output function.
0: Not used
1: Automatically print for PASS/FAIL screening.
2: Print selectively when the PASS/FAIL state is held.
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Example
Transmission :SYSTem:OPTion:PRINter 0
The printer output function is set to "Not used."
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the following states
causes an execution error:
･
READY state
･
Optional function setting screen
Syntax :SYSTem:OPTion:PRINter?
Function Returns the printer output function setting as a numerical value in NR1
format.
<data>
Numerical data in NR1 format between 0 and 2
Example
Response
If headers are on :SYSTEM:OPTION:PRINTER 0
If headers are off 0
Error
If the response message is longer than 300 bytes, a query error is generated.