Hioki 9275, Instruction Manual

Page: 19 / 30

7
――――――――――――――――――――――――――――――――――――――
1.1 Product Overview
――――――――――――――――――――――――――――――――――
Chapter 1
General
1.1 Product Overview
When connected to the 3270 Current Monitor or the
3271 AC Current Monitor, this clamp-on sensor can
output current waveforms without any need to cut the
conductor being measured, simply by clamping the
sensor onto the connector.
This equipment can thus be used in conjunction with a
recorder, an oscilloscope, or other such equipment in
order to record and measure current waveforms.