Hioki 8860-50, Instruction Manual

Page: 427 / 490

Appendix 1 Error Messages
A
1
Appe
ndix
Error messages consist of either “Error” or “Warning” displays.
A screen message appears whenever an error occurs. In either case, take the
remedial action indicated.
A beep may sound if the beeper setting on the Environment (Env) Settings
screen is
[Beep 1] or [Beep 2] .
See "13.2.9 Specifying Beep and Operation Sounds" (p. 359)
Appendix
Appendix 1 Error Messages
Message
Displayed Message
Number (Msg No.)
Warning Display
Appears just once when an error oc-
curs. Disappears within a few sec-
onds.
Also disappears when any key is
pressed.
Message
Displayed Message
Number (Msg No.)
Error Display (p. A7)
Remains displayed until the error is
corrected, or until you press the
STOP
key.
Displayed Warnings
Msg
No.
Message Remedial Action Reference
1
Out of paper. Load more paper.
Quick Start Manual :
"3.3 Loading Recording
Paper (With a Printer
Module Installed)"
2
Printer lever is raised. Lower the printer lever.
3
No response from printer.
Turn the external printer on. Also verify
that the external printer (if used) is work-
ing.
4
Printer head temperature error.
Use in an environment with the specified
operating temperature and humidity.
"Chapter 15 Specifica-
tions" (p. 395)
5
Printer is not installed.
Printing is not available. Either the internal
printer is not installed, or no external print-
er is connected.
6
Printer internal error.
An unexpected error occurred. Perform a
system reset. If this error continues to ap-
pear, damage may have occurred requir-
ing repairs.
"13.3.3 Initializing Sys-
tem Settings (System
Reset)" (p. 366)