manualshive.com logo in svg

Hioki 8860-50, Instruction Manual

Share
Download
Hioki 8860-50 Instruction Manual Download Page 371

13.2  Making Key Operation and Operational Settings

359

13

Chapter 13

  System 

Env

ironment Sett

ings

Beep sounds can be specified to alert you to operation status. They can be
selected from two types.
Sounds can also be emitted for key operations.

13.2.9 Specifying Beep and Operation Sounds

Beep Sound Settings

To open the screen: 

Press the 

DISP 

key



Press the 

F7 

[System]

 key



Select 

 with the 

SUB MENU 

keys 

Env Settings screen

See

Screen Layout (p. 45)

Operating Key

Procedure

1

CURSOR

Move the cursor to the 

[Beep Sound] 

item.

2

F1 to F8

Select the beep sound.

Off

Do not emit beep sound.

Beep 1

Emit a beep sound on error messages
(error and warning displays) and when
results are judged to be invalid. (default
setting)

Beep 2

In addition to the Beep 1 events, emit a
beep sound on start, trigger, stop, and
the end of auto save.

Operating Key

Procedure

1

CURSOR

Move the cursor to the 

[Keypress sound]

 item.

2

F1 to F8

Select whether or not to emit operation sounds.

Off

Do not emit sound. (default setting)

Type 1

Emit sound.

Type 2

Emit operation sounds. However, the
sound is emitted only once, even if the
key is kept held down.

Key Operation Sound Settings

To open the screen: 

Press the 

DISP 

key



Press the 

F7 

[System]

 key



Select 

 with the 

SUB MENU 

keys 

Env Settings screen

See

Screen Layout (p. 45)

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands