Hioki 8860-50, Instruction Manual

Page: 378 / 490

13.3 Making System Settings
366
Select groups of settings currently in force on the instrument, and initialize the
settings.
Initialization returns the instrument to the factory default state.
See "Appendix 2.1 List of Default Settings" (p. A9)
By default, the Various Settings and System Settings 1 (Environment) setting
groups are selected for initialization in this screen.
13.3.3 Initializing System Settings (System Reset)
1
2
Initializing System Setting Data
To open the screen: Press the
DISP
key

Press the
F7
[System] key

Select with the
SUB MENU
keys

Init Settings screen
See Screen Layout (p. 51)
Operating Key Procedure
1
CURSOR Move the cursor to the item you want to initialize.
F2 Select [On].
Select [Off] for the groups of settings that you do
not want to initialize.
2
CURSOR
Move the cursor to the [Initialize Settings] button.
F1
Select [Execute].
A confirmation dialog box appears.
F2 Select [Execute].
To cancel initializing
Select F3 [Cancel] .
Initialization is complete when " Completed nor-
mally " appears.
Various Settings
(Status, Channel,
Sheet, Trigger, etc.)
Current settings in various set-
ting screens
(Default setting: On)
System Settings 1
(Environment)
The settings in the Environ-
ment Settings screen(Default
setting: On)
System Settings 2
(Communications)
The settings in the Communi-
cation Settings screen (Default
setting: Off)
: On
: Off
To initialize all settings
Select the [Initialize All] button. All settings are initialized and the instrument
reboots. The zero-adjust values of input modules and the correction value of the
8958 16-Ch Scanner Unit are not initialized.