Hioki 3802-50, Instruction Manual

Page: 110 / 168

26
2.6 Diode Check
2.6 Diode Check
Never apply voltage to the test leads. Doing so may
damage the instrument and result in personal injury.
To avoid electrical accidents, remove power from
the circuit before measuring.
1.
Set the function switch.
2.
Connect the test leads to the test ter-
minals.
3.
Connect the test leads to the object
being tested.
4.
Read the value displayed in the
main display.
With a normal diode, the sequential order
voltage (0.3 to 0.8 V) is displayed.
When the display value less than 0.0500 V,
buzzer sounds.
When the display value drops to the range
of 0.3 to 0.8 V, a single buzzer sounds to in-
dicate that a diode was detected.
When the display value drops to the range
of 0.3 to 0.8 V, a single buzzer sounds to in-
dicate that a diode was detected.
<Example>
Red Black
Sequential
order
Cathode Anode
Black Red