Hioki 3645-20, Instruction Manual

Page: 19 / 40

9
_____________________________________________________________________
Set Up
______________________________________________________________
Sleeping......
NOTE
See COMMUNICATION BASE instruction manual to connect
logger and to install application software. To use application
software, see operation guide.
2.2 Power Save Function
Display window is automatically turned off in
approximately 15 seconds after last key entry. (Sleep)
However, while recording,
REC
/ / mark shows
each conditions.
Press any button to turn display on to display measurement
value or to set settings.
Note when interval setting display is on, sleep does not
engage with no button press.
Initially, power save function is on. To turn off power save
function, follow the instructions below.
When power save function is off, maximum continuous
duration is approximately 20 days.
1. Connect logger, COMMUNICATION BASE and personal
computer.
2. Start up application software packaged with
COMMUNICATION BASE.
3. Go to Communications on the menu bar and select Power
Save Options. Choose Off to turn off power save function.