Hioki 3645-20, Instruction Manual

Page: 15 / 40

5
_____________________________________________________________________
Product Outline
______________________________________________________________
①→ ②→ ③→ ④→
② ③
① ② ③ ④
Measurement (1 s)
Interval
Preheat time
Display ON
Display OFF
Measurement
Indication updated
Recording
Preheat time
LCD
①→②→③→④→⑤→⑥→⑦→⑧→⑨→⑩→⑪
① → ② → ③ → ④ → ⑤ → ⑥ → ⑦ → ⑧ → ⑨ →
Display ON
Display OFF
Measurement (1 s)
Measurement
Indication updated
Recording
Preheat time
LCD
NOTE
If the Preheat function is active, the measurement value recorded
in the immediately preceding measurement is displayed in
Recording ("
REC " on) until the recording interval elapses,
allowing the following measurement to be conducted. When the
power-save function is active and any button is pressed to
conduct monitoring, quite some time may be required for stable
measurement values to be obtained, depending on the response
time of the connected sensor (time required for the output to
stabilize after the sensor is powered up).
When Preheat is ON
(1) Recording ("
REC
" on)
In the recording mode, the unit first outputs the Preheat
signal once the preset recording interval has elapsed, and
then conducts measurement. It records the measurement
value and updates the LCD indication.
(2) Monitoring ("
REC
" off)
In the monitoring mode, the unit conducts measurement
every second and updates the LCD indication. In this
condition, the unit delivers the Preheat signal permanently.