Hioki 3504-40 C HiTester, Instruction Manual

Page: 261 / 292

9.1 Basic Specifications
255
9
Specifications
Chapter 9
9.1 Basic Specifications
Product Specifications
Measurement items C (capacitance), D (dissipation factor tan

)
Measurement Frequency 120 Hz, 1 kHz
Frequency accuracy: ±
0.01% or less
Measurement Signal Level (1) Constant voltage mode: 100 mV (only for Model 3504-60), 500 mV, 1 V
Measurement range
CV1 V: to 70

F range (measurement frequency: 1 kHz)
CV1 V: to 0.7 mF range (measurement frequency: 120 Hz)
Cv100 mV, CV500 mV: to 170

F range (measurement frequency: 1
kHz)
Cv100 mV,CV500 mV: to 1.45 mF range (measurement frequency: 120
Hz)
Signal level accuracy of
±
10%
±
5 mV
(2) Open terminal voltage mode: 100 mV (only for Model 3504-60), 500 mV,
1 V
Measurement range: other than above
Output resistance: 5
 ±
1

Signal level accuracy:
±
10%
±
5 mV
Guaranteed Accuracy Range C : 0.9400 pF to 20.0000 mF
D : 0.00001 to 0.10000 (0.10001 to 1.99999 are reference values)
Measurement Range C : 009.400 pF to 20.0000 mF (120 Hz, 10 range)
00.9400 pF to 2.00000 mF (1 kHz, 10 range)
Auto, manual (up, down)
Equivalent Circuit Mode Series and parallel equivalent circuit modes
Auto, manual
Measurement Time Representative value: 2.0 ms (measurement frequency: 1 kHz, measure-
ment speed: FAST)
* The measurement speed differs depending on the measurement fre-
quency and measurement speed.
Measurement Speed FAST, NORMAL, SLOW
Trigger Function Setting of internal trigger or external trigger is possible
Zero Compensation Open circuit and short circuit compensation is possible
Load Compensation Measuring the sample to be used as the standard sample and then com-
pensating the measurement values is possible
Offset circuit compensation
Set value cannot be subtracted from the measurement value