Hioki 3447-01, Instruction Manual

Page: 30 / 68

3.1 Before Measurement
24
3.1.2 Auto Power Save Function
With the auto power save function switched on,
the power is automatically switched off if no button
is pressed for approximately 10 minutes.
As the default setting, the auto power save func-
tion is switched on. ("
APS " lights)
If the message “ ERROR! ” appears when the
power is turned on, the unit’s settings may not
have been saved properly. Cycling the power off
once, and then on again can ordinarily restore
normal operation. If this does not restore normal
operation, equipment failure is possible. Contact
the store from which you purchased the unit for
assistance.
1.
While pressing , press for about
2 seconds to turn the power on.
2.
" APS " lights on the LCD. The auto power
save function is now switched on.
Switching the auto power save function from OFF to ON
1.
While pressing , press for about
2 seconds to turn the power on.
2.
" APS " disappears on the LCD. The auto
power save function is now switched off.
Switching the auto power save function from ON to OFF