Hioki 3447-01, Instruction Manual

Page: 24 / 68

2.3 Connecting the Temperature Probe
18
2.3 Connecting the Temperature Probe
• To avoid damage to the product, protect it from
vibration or shock during transport and handling,
and be especially careful to avoid dropping.
• To avoid damaging the product, never connect
any sensor other than the 9478 or 9479
SHEATH TYPE TEMPERATURE PROBE (with
recording switch) to the sensor connector.
Never attempt to input a signal through the sen-
sor connector.
• The ends of the probes are sharp. Be careful to
avoid injury.
• When disconnecting the temperature probe, be
sure to release the lock before pulling off the
connector. Forcibly pulling the connector without
releasing the lock, or pulling on the cable, can
damage the connector.
• To avoid damaging the probes, do not bend or
pull the probes.
• Keep the cable well away from heat sources, as
bare conductors could be exposed if the insula-
tion melts.
• Improper connecting of a connector will permit
passage of moisture into the device and dam-
age it.
• Do not bend the temperature probe’s measuring
element (the metallic portion). Doing so is likely
to cause damage.