Hinowa HS701, User Manual - Machine Safety And Maintenance

Page: 63 / 108

‐ No one should occupy the driving position during lifting operations;
‐ Check that there are no persons in the area;
‐ Use cables strong enough to support the machine weight;
‐ Pay particular attention to any sharp edges that could damage the lift cable and
protect it accordingly.
‐ Comply with the applicable standards and norms of good practice in choosing
the right lifting systems, cables, fixing systems, etc. and when performing lif‐
ting tasks.
‐ Prepare an operating plan for the lifting tasks, meticulously analysing the risks.
‐ Remove any load/object from inside the skip.
L
IFTING POINTS
There are four lifting points on the dumper. One is located on the right side mem‐
ber, one on the left side member and the other two on the basis of the structure.
They are identified by this symbol:
To lift the machine use a structure wide enough not to interfere with the machine
elements, connected through ropes as shown in the picture.
Both the ropes and the structure should comply with current legislation.
61
C
OMPACT DUMPER
HS701 ‐ H
INOWA
MUHS70120615
ATTENZIONE
CAUTION
STRUCTURE
ROPES
HOOKING
POINTS
0
6
4
0
4
0
A
0
0