UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
hinkley.com
TEMPEST PACKAGE CONTENT
1
Blade Set of 5
2
Hanging Bracket
3
Ceiling Canopy and Trim Ring
4
5
6
7
8
9
10
11
12
13
1
6
5
13
12
3
8
7
9
2
10
11
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
NOTE:
Design of parts shown above may look slightly different for
your specific model of fan.
Downrod Asm.
Yoke Cover
Wall Control w/12v Battery
Blade Arm Set of 5
Mounting Plate
Detachable Switch Housing
Receiver Incl. 5 Wire Nuts
Wall Plate, Face Plate,
2 Sets of Mounting Screws,
and Machine Screws
Hardware Bag
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
Bracket Mounting Hardware
(wood screws, screws, lock
washers, washers, wire nuts),
Blade to Blade Arm Screws and
Rubber Washers,
Balance Kit
4
Ball Moisture Cover