INSTALLING THE LIGHT KIT AND GLASS SHADE
Fig. 1
Mounting plate
Mounting Hub
(bottom of motor)
Fig. 2
©2019 Hinkley Lighting, Inc.
|
hinkley.com
|
11
Mounting Plate
Detachable Switch
Housing
Screws
Screws
1
2
Remove the 1 of 3 screws from the mounting hub and keep it
for future use. Loosen the other 2 screws. (Do not remove)
Place the key holes on the mounting plate over the 2 screws
previously loosened from the mounting hub , turn mounting
plate until it locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws previously loosened
and the one previously removed. (Figure 1)
1
2
Remove 3 screws from the mounting plate.
Install the Detachable Switch housing assembly to the mounting
plate with four screws previously removed.