Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
hinkley.com
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
PACKAGE CONTENT
1
Blade Set of 3
3
Blade Support Plates
4
Mounting Bracket
5
2
7
6
8
9
10
11
1
3
7
8
4
5
6
2
11
NOTE:
Design of parts shown above may look slightly different for
your specific model of fan.
16W LED Assembly
Adapter Plate
Glass Shade
Receiver (pre-installed)
Bracket Mounting Hardware
(wood screws, screws, lock washers,
star washers, flat washers, wire nuts),
Blade to Motor Screws w/Lock
Washers,
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
Hardware Bag
Decorative Ring
MH900872Fxx
CNW900872
GL900852ETCH
E900852LED
AP900852Fxx
x
RG900872Fxx
x
In Hardware Bag
BL900872Fxx
980014FWH-R
XX=FAN FINISH
Cradle B (for flat wall use only)
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws,
Wall Control w/2032 Battery,
9
10
+