WARNING:
Before starting installation, disconnect the power by
turning off the circuit breaker or removing the fuse at fuse box.
Turning power off using the fan switch is not sufficient to prevent
electric shock.
Remove the 1 of 3 screws from the posts of the LED
assembly decorative housing and keep it for future use.
Loosen the other 2 screws. (Do not remove)
While holding the LED assembly under your fan, make the
polarize plug connections: (Fig. 2)
- Red to white
- Black to black
Place the key holes on the LED assembly over the 2 screws
previously loosened, turn the light plate until it locks in
place at the narrow section of the key holes. Secure by
tightening the 2 screws previously loosened and the one
previously removed. (Fig. 1)
Raise glass shade up against adapter plate and secure it
to the fan by turning the glass shade clockwise until snug.
DO NOT OVERTIGHTEN.
Restore power and your light kit is ready for operation.
INSTALLING THE LED ASSEMBLY AND GLASS SHADE
Screws
10
|
hinkley.com
1
2
3
4
5
Fig. 1
Fig. 2
Wire connectors
Adapter plate
LED assembly
LED assembly
Glass shade