©2019 Hinkley Lighting, Inc.
|
hinkley.com
|
07
NOTE:
Fan has 6 feet of hook-up wire in case you are using
a long extension downrod.
1
2
3
4
5
Slip the
yoke
cover, trim ring and canopy onto the downrod.
(Fig. 3)
Thread the hanger ball onto the downrod, insert the cross
pin through the downrod and tighten. Tighten the set screw.
Lift ball/downrod/fan into hanger bracket opening.
NOTE:
The tab opposite hanger bracket opening should fit
in slot on ball. (Fig. 4)
Make wire connections, (refer to section titled "Electrical
Connections").
Slide canopy up and fasten to hanger bracket with 4 screws
provided.
Fig. 4
Registration slot
Fig. 3
Ground Wire
Hook-up (3) Wires
Downrod
Cross pin
Hanger ball
Set screw
Top of
Fan Body
Yoke cover
Canopy
Trim Ring
