HIMS Smart Beetle, User Manual, Page: 16 / 27

2) Press the "up or down arrow" key until you get to "Open Bluetooth
settings", and press "Enter".
3) From the tabs list, use "Control-Tab" to select the Device tab.
4) Tab to the Add button, and press "Enter".
5) Press "Space" to check the checkbox for "My device is setup and ready to
be found", and then press enter".
6) The XP machine should find the Smart Beetle under the name
""BrailleSense----where --- represents a numeric value.
7) Press the "down arrow" key to focus the name of your HIMS Braille device.
8) Tab to the next button, and press "Enter".
9: The connection should be automatically established without entering a pin
code.
10) The computer should display the message, "Found new hardware" and
the finish dialog should appear.
If the connection is successful, the dialog should display that the
Bluetooth device was successfully set up. Please note the numbers for the
incoming and outgoing com ports. For example, the outgoing COM port may
be
COM 5 and the incoming COM port may be COM 6. Do not be surprised if
your COM ports are not set to COM 5 and COM 6. The COM ports used can
vary from computer to computer.
11) Press "tab" to get to the Finish button, and press "Enter" to activate it.
12) You are returned to the Bluetooth device settings dialog. From the tabs
list, press Ctrl-Tab twice to focus the COM ports tab control.
13) Press "tab" to get to the list of COM ports, and press the Down Arrow to
move through the list of COM ports to verify the com port numbers.
14) Tab to the OK button, and press Enter.
2. Connecting via Bluetooth to a Windows 7/Windows 8 computer.
1) Open the Control Panel.
2) Open Devices and Printers
3) Tab to "Add a Device" and press "Enter".
4) Windows searches for devices and displays them in a list.
5) Use the Up or Down arrow to navigate to the Smart Beetle and press
"Enter".
6) The PC should automatically establish the connection without requesting a
pin code.
7) The computer should display the message, "Found new hardware" and the
final dialog should appear on the computer. The dialog should display that the