HIMS Smart Beetle, User Manual, Page: 12 / 27

2) Press the shortcut key U or press "Space-1" or "Space-4" to move to 'USB
mode' and press "Enter".
A switching to USB connection mode message is displayed. If the USB cable is not
connected, Retry after is displayed indicating you should retry after connecting the
USB cable.
Switching to a Bluetooth Keyboard Connection
The Bluetooth Keyboard connection refers to the ability to use the Braille keyboard to
emulate a standard QWERTY keyboard by using Braille key combinations to create
QWERTY keystrokes. See section 5.1.2 for a list of QWERTY keystrokes and their
Smart Beetle Braille equivalents.
To switch to Bluetooth keyboard mode, from any location on the unit, press "Power-
Left scroll".
To switch to Bluetooth keyboard mode using the menu, follow the steps below.
1) Press the "Power" button briefly to open the menu. "Bluetooth serial" is
displayed.
2) Press the shortcut K or press "Space-1" or "Space-4" to move to "Bluetooth
keyboard" and press "Enter".
If there is information associated with an existing connection, the device is
automatically connected. If there is no recognized device available, "Pairing KBD" is
automatically activated.
Switching to the pairing list
The pairing list displays the list of devices, both BRL and KBD that are currently
connected to Smart Beetle or whose pairings are saved. The list displays the name
and the connection status of each device.
The Pairing list saves up to 5 BRL and up to 5 KBD devices. If there are 5 devices in
either list, when you connect a new device, the pairing information for the device at
the bottom of the list is automatically deleted, and the new device is connected,
To switch to the "Pairing list'", from any location on the unit, press "Power-F 4".
To switch to the Pairing list using the menu, follow the steps below.
1) Press "Power" briefly to open the menu. "Bluetooth serial" is displayed.
2) Press the shortcut key L or use "Space-1" and "Space-4" to move to "Pairing
List" and press "Enter".
3)
To switch to a different device, navigate to it in the list and press “Enter”.
4) Press "Space-E" to exit the pairing list and return to your previous position.
Switching to Pairing mode
Use this menu item when you want to connect with a new Bluetooth device.