1
3
2
4
5
6
1
3
2
4
5
6
1 TX to 1 RX Mode
1 TX to 2 RX Mode
Device Connection Number
Signal Strength
Video Format
Brand
Power Supply Method
Frequency Channel
Device Connection Number
Signal Strength
Video Format
Brand
Power Supply Method
Frequency Channel
After the transmitter is paired with one single receiver, an additional mobile
device can be connected;
1 TX to 1 RX Mode
The transmitter can be paired with two receivers. After the pairing is completed,
an additional mobile device can be connected. NOTE: Only after one receiver is
successfully paired with the transmitter, the other receiver can be paired;
TX
TX
TX
RX1
RX1
RX2
RX
ZO1000 can be paired with all "Shimbol" brand transmission systems and
monitors;
1 TX to 2 RX Mode
Full Compatible with Shimbol Brand
06
/Product Status
1
2
1080P60
1080P60
1080P60
SHIMBOL
USB
CH
00
05
/OLED Display
1
2
1080P60
SHIMBOL
USB
CH
00
2
1080P60
SHIMBOL
USB
CH
00
3
1
11
2
4
5
6
3
1
2
4
5
6
2
SHIMBOL
USB
CH
00
1
SHIMBOL
USB
CH
00
1
SHIMBOL
USB
CH
00
1
2
1080P60
1080P60
SHIMBOL
USB
CH
00
1. When the receiver is not connected, the frequency channel will not be displayed;
2. After the receiver is booted, the frequency channel will not be displayed until the
transmitter is connected;
Notice
4. In one TX to two RX paring mode, it is recommended to select two different
receiver numbers to prevent IP conflicts. If both receivers select the same number
(RX1 or RX2 at the same time), you need to manually change the number on the
receiver to display the corresponding RX1 and RX2.(The number refers to the device
connection number);
3. If it is used in connection with Shimbol brand series video transmission system
that does not support the one TX to two RX mode, it is recommended to use the
ZO1000 Receiver “Device connection number” adjusted to ZO500/ZO600S.
The adjusting method is as follows:
Long press the receiver "Menu Button"3s to enter System Setting-Number-
ZO500/ZO600 to adjust. Otherwise, there will be a problem of sound but no picture;
