4 Start-up
X-DO 24 01
Page 34 of 52
HI 801 019 E Rev. 4.00
4.4
Configuring the Module in SILworX
The module is configured in the Hardware Editor of the SILworX programming tool.
Observe the following points when configuring the module:
To diagnose the module and channels, both the statuses and the measured value can
be evaluated within the user program. For more information on the statuses and
parameters, refer to the tables starting with Chapter 4.4.1.
If a redundancy group is created, its configuration is defined in the tabs. The tabs
specific to the redundancy group differ from those of the individual modules, see the
following tables.
To evaluate the statuses from within the user program, connect the module statuses to
global variables. Perform this step in the Hardware Editor using the module's detail view.
The following tables present the statuses and parameters for the module in the same order
given in the SILworX Hardware Editor.
TIP
To convert hexadecimal values to bit strings a scientific calculator such as the Windows
®
calculator with the corresponding view can be used.
