HIMA HIMatrix, Manual

Page: 12 / 38

3 Product Description AI 8 01
Page 12 of 38 HI 800 195 E Rev. 2.00
3.1.1.1 Reaction in the Event of a Fault
If the device detects a fault on an analog input, the
AI.Error Code
parameter is set to a value
greater than 0. If a module fault occurred, the SILworX system parameter
Module Error Code
is
set to a value greater than 0, or if ELOP II Factory is used, the
Module.Error Code
signal is set
to a value greater than 0.
In both cases, the module activates the
ERR
LED.
In addition to the analog value the the error code must be evaluated. The analog value must be
configured to ensure a safety-related reaction.
The error code allows the user to configure additional fault reactions in the user program.
3.2 Equipment, Scope of Delivery
The following table specifies the available module variants:
Designation Description
AI 8 01 Module with 8 analog inputs
AI 8 014 Module with 8 analog inputs,
Operating temperature: -25...+70 °C (temperature class T1),
Vibration and shock tested according to EN 50125-3 and EN 50155,
class 1B according to IEC 61373
Table 5: Available Variants
3.3 Type Label
The type plate contains the following details:
 Product name
 Bar code (1D or 2D code)
 Part no.
 Production year
 Hardware revision index (HW Rev.)
 Firmware revision index (FW Rev.)
 Operating voltage
 Mark of conformity
Figure 1: Sample Type Label