Hilti WSJ 750-EB, Original Operating Instructions

Page: 14 / 48

6 English 377835
*377835*
The lower the orbital-action setting, the finer and cleaner the cut edges will be. The optimum setting can be
determined by carrying out practical tests.
Status Meaning
Position 0 No orbital action
Position 1 Low orbital action
Position 2 Medium orbital action
Position 3 High orbital action
3.7 Anti-splinter insert
The product can be equipped with an anti-splinter insert.
The anti-splinter insert helps prevent splintering on the surface of wood materials when cutting.
3.8 Dust extractor with dust removal system
The dust extractor reduces dust emissions, increases working safety by providing better visibility of the
cutting line and reduces exposure to dust and wood chips at the workplace.
Always connect the dust removal system to the suction adapter when working over a lengthy period with
wood or materials that can cause high dust concentrations.
The guard must be installed if you work with a dust removal system.
3.9 Items supplied.
Orbital-action jig saw, saw blade, anti-splinter insert, dust removal adapter, slider, hex key, guard, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Orbital-action jig saw
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be 5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary in the event of deviations from
the rated voltage and for country-specific versions. Please refer to the power tool’s rating plate for details of
its voltage, frequency, current and input power ratings.
WSJ 750-ET WSJ 750-EB WSJ 850-ET WSJ 850-EB
Rated power input 750 W
(1.01 hp)
750 W
(1.01 hp)
850 W
(1.14 hp)
850 W
(1.14 hp)
Weight 2.8 kg
(6.2 lb)
2.6 kg
(5.7 lb)
2.7 kg
(6.0 lb)
2.6 kg
(5.7 lb)
Maximum cutting depth for
structural steel
10 mm
(0.4 in)
10 mm
(0.4 in)
10 mm
(0.4 in)
10 mm
(0.4 in)
Maximum cutting depth for
wood
120 mm
(4.7 in)
120 mm
(4.7 in)
150 mm
(5.9 in)
150 mm
(5.9 in)
4.2 Dust removal attachment
WSJ-DRS
Weight 0.25 kg
(0.55 lb)