![background image](http://html1.mh-extra.com/html/hilti/vc-40h-x/vc-40h-x_manual_2136507031.webp)
*2243106*
2243106
English
27
10.1
Troubleshooting table
Malfunction
Possible cause
Action to be taken
Class M and class H
vacuum cleaners:
Acoustic
warning (of reduced suction)
The dust bag is full.
▶
Change the dust bag.
The filter element is clogged with
dirt or dust.
▶
If the automatic filter cleaning
system is deactivated, activate
it and allow the vacuum cleaner
to run for 30 seconds.
The suction hose or dust hood on
the electric tool is blocked.
▶
Clean the suction hose and the
dust hood.
The hose diameter setting is incor-
rect.
▶
Set the hose diameter.
▶
For applications with a hollow
drill bit, select a hose diameter
of 15 mm.
Dust is blown out of the appli-
ance.
The filter element is not fitted cor-
rectly.
▶
Fit the filter element again
correctly.
The filter element is damaged.
▶
Fit a new filter element.
The appliance switches it-
self off or on inadvertently or
static electricity discharges
through the user.
Electrostatic charge is not
conducted away – the
appliance is connected to an
unearthed/ungrounded power
outlet.
▶
Connect the appliance to an
earthed/grounded power outlet
and use an antistatic suction
hose.
The appliance doesn’t start or
switches itself off after a short
time.
The water level cut-out is acti-
vated.
▶
Clean the sensors and the
area around the sensors with a
brush.
The motor doesn’t restart.
The mains circuit breaker has been
tripped.
▶
Reset the circuit breaker.
▶
Find the reason for the overload
current if the circuit breaker
trips again.
The waste material container is full.
▶
Switch the appliance off and
empty the waste material
container.
The motor overheating protection
cut-out has been activated.
▶
Switch the appliance off and
allow it to cool down for about
5 minutes.
▶
If the motor doesn’t start, return
the appliance to
Hilti
Service.
The motor is repeatedly switched
off by its thermal cut-out.
▶
Clean the air vents carefully
using a dry brush.
The motor doesn’t run when
set to “AUTO”.
The appliance is faulty or is not
correctly plugged in.
▶
Make sure that the supply
cord plug is fully plugged in
and check that the appliance
functions correctly.
The automatic filter element
cleaning system doesn’t
work.
No suction hose is connected.
▶
Connect the suction hose.
11
Disposal
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti representative for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Do not dispose of electric appliances together with household waste.
Printed: 24.07.2019 | Doc-Nr: PUB / 5505414 / 000 / 00
Summary of Contents for VC 40H-X
