background image

English

13

7.8 Emptying the waste material container when no dust bag is fitted (picking up liquids)

1. Disconnect the supply cord plug from the power outlet.

2. Lift the vacuum cleaner top section away from the waste material container and place it on a level surface.

3. Grip the waste material container by the recess provided and empty it by tipping out the contents.

4. Clean the edge of the waste material container with a cloth.

5. Fit the vacuum cleaner top section onto the waste material container and close the two catches.

8 Care and maintenance

8.1 Care and maintenance of the appliance

WARNING

Electrical hazards.

Improper repairs to electrical parts may lead to serious injuries.

Electrical parts may be repaired only by trained electrical specialists.

Keep the appliance, especially its grip surfaces, clean and free from oil and grease. Do not use cleaning

agents containing silicone.

Never operate the vacuum cleaner when the air vents are blocked. Clean the air vents carefully using a

dry brush. Do not permit foreign objects to enter the interior of the appliance.

Clean the outer surfaces of the appliance with a slightly damp cloth at regular intervals. Do not use a

spray system, pressure jet washer or running water for cleaning as this may negatively affect the electrical

safety of the appliance.

Applicable to UL, UM and UME vacuum cleaners

The appliance must be handled for cleaning and maintenance in a way that avoids exposing maintenance

personnel and other persons to any hazards.

Use filtered forced ventilation.

Wear personal protective equipment.

Clean the maintenance area in a way that prevents hazardous substances escaping into the surrounding

environment.

Vacuum off the outer surfaces of the appliance and wipe it clean or seal it in a suitable container, e.g.

large plastic bag, before removing it from an area contaminated with hazardous substances. This will

help to avoid distribution of the hazardous dust deposited on it.

When maintenance or repairs are carried out, all contaminated parts which cannot be satisfactorily

cleaned must be packed in impermeable bags and disposed of in compliance with the applicable

disposal regulations.

The appliance must be subjected to a technical inspection by

Hilti

Service or a trained person at least

once a year to check, for example, for damage to the filter, air leakage, and to ensure correct operation

of controlling devices.

8.2 Automatic filter cleaning

Note

Do not attempt to clean the filter element by knocking it against a hard object and do not use pointed

instruments. This will reduce the life of the filter element.

Do not use compressed air to clean the filter element. This may cause tears in the filter material.

The condition of the filter element deteriorates with use.

Replace the filter element at least every six months.

However, if used intensively, the filter element should be replaced more often.

Printed: 25.08.2017 | Doc-Nr: PUB / 5370890 / 000 / 00

Summary of Contents for VC 20-U





















Reviews: