5
Fig. 7: Removing the battery
Press the release buttons on the sides of
the BP40 or BP72 battery and pull it out
of the battery compartment.
Fig. 8: Inserting the battery
Remove the protective cap from the bat-
tery. Push the battery into the battery
compartment as far as it will go, and it is
heard to click into place (double click –
engages at two points).
Fig. 9: Charging the battery
Remove the protective cap from the
battery. Insert the battery into the charger’s
battery compartment. The battery must
engage securely in the charger. Please
refer to the C 7/24 and C 7/36-ACS
operating instructions for a description of
the charging procedure.
Servicing
Electric tools must comply with the appli-
cable safety regulations. Servicing must
be carried out only by trained electrical
specialists. The use of original Hilti spare
parts ensures optimum safety.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071016 / 000 / 00
