Hilti TE 704 breaker
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti insert tool
grease, operating instructions
Technical data
Power input:
1030 W
Voltage (versions):
100 V, 110 V, 115 V, 230 V, 240 V
Current input:
11 A, 10 A, 5 A
Frequency:
50–60 Hz
Machine weight:
6.5 kg
Dimensions:
515
×
215
×
115 mm
Hammering speed under load:
1940/2740 blows/min.
Single impact energy:
4.3 joules / 8.5 joules
Chiselling performance in medium-hard concrete: 500 cm
3
/min. with standard SM36 chisel
Chisels:
Pointed, narrow flat, wide flat, extra
wide flat, hollow, channel (narrow or
wide) scoop, in standard version
Chuck:
TE-Y
Chisel cutting edge adjustment to 18 positions
Permanent lubrication
Adjustable side handle
On/off switch for continuous running
Electronic r.p.m. regulation for improved operating convenience
Hammering power regulation: max. = 100%, min. = 50%
Double insulation, class II
Service indicator with warning lamp
Noise and vibration
The sound power level of the machine is less than 108 dB (A)
Wear ear protection.
The typical weighted acceleration is 11 m/s
2
.
The respective regulations of your trade association and the enclosed safety pre-
cautions must be observed.
Right of technical modifications reserved.
Do not use this product in any way other
than as directed by these operating in-
structions.
1
2
3
4
5
1
2
3
6
Always wear ear
protectors.
Always wear pro-
tective gloves.
Always wear safety
glasses.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071185 / 000 / 00
