background image

c)

Keep children and bystanders away while oper-
ating a power tool.

Distractions can cause you to

lose control.

5.1.2 Electrical safety

a)

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

b)

Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

c)

Do not expose power tools to rain or wet con-
ditions.

Water entering a power tool will increase

the risk of electric shock.

d)

Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.

Damaged or entangled cords

increase the risk of electric shock.

e)

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

Use of a

cord suitable for outdoor use reduces the risk of
electric shock.

5.1.3 Personal safety

a)

Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.

A

moment of inattention while operating power tools
may result in serious personal injury.

b)

Use safety equipment. Always wear eye pro-
tection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.

c)

Avoid accidental starting. Ensure the switch is
in the off-position before plugging in.

Carrying

power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.

d)

Remove any adjusting key or wrench before
turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may
result in personal injury.

e)

Do not overreach. Keep proper footing and bal-
ance at all times.

This enables better control of

the power tool in unexpected situations.

f)

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.

Loose clothes, jewellery

or long hair can be caught in moving parts.

g)

If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.

Use of these

devices can reduce dust-related hazards.

5.1.4 Power tool use and care

a)

Do not force the power tool. Use the correct
power tool for your application.

The correct power

tool will do the job better and safer at the rate for
which it was designed.

b)

Do not use the power tool if the switch does not
turn it on and off.

Any power tool that cannot be

controlled with the switch is dangerous and must
be repaired.

c)

Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools.

Such prevent-

ive safety measures reduce the risk of starting the
power tool accidentally.

d)

Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.

Power tools are dangerous in the

hands of untrained users.

e)

Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power
tool repaired before use.

Many accidents are

caused by poorly maintained power tools.

f)

Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

g)

Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.

Use of

the power tool for operations different from those
intended could result in a hazardous situation.

5.1.5 Battery tool use and care

a)

Ensure the switch is in the off position before
inserting battery pack.

Inserting the battery pack

into power tools that have the switch on invites
accidents.

en

22

Summary of Contents for TE 7-A



















Reviews: