Hilti TE 505 breaker
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti insert tool grease, operating instructions
Technical data
Power input:
900 W
Voltage (versions):
115 V, 230 V
Current input:
8.5 A, 4.2 A
Frequency:
50–60 Hz
Machine weight:
5.2 kg (11.5 lbs)
Dimensions:
440
×
90
×
210 mm (17.3
×
3.5
×
8.3 inch)
Hammering speed under load:
1860/2630 blows/min.
Single impact energy:
2.6 joules / 5.2 joules (1.9 ft lbs / 3.8 lbs)
Chiselling performance in medium-hard concrete:
up to 300 cm
3
/min. with standard SM36 chisel
up to 360 cm
3
/min. with light-duty LSM 28 chisel
Chisels:
Pointed, narrow flat, wide flat, extra wide flat,
hollow, channel (narrow or wide) scoop, in stan-
dard versions and some of light-duty design
Chuck:
TE-Y
Chisel cutting edge adjustment to 12 positions
Permanent lubrication
Adjustable side handle
On/off switch of trigger bull design
Electronic r.p.m. regulation for improved operating convenience
Hammering power regulation: max. = 100%, min. = 50%
Double insulation, class II, CENELEC HD 400
This electric tool is radio and TV interference suppressed in compliance with the EC directives
76/889/EC + 82/449/EC
Radio and TV interference suppression as per EN 55 014
Service indicator with warning lamp
Right of technical modifications reserved.
The respective regulations of your trade association and the enclosed safety precautions must
be observed.
Do not use this product in any way other than as directed by these operating instructions.
3
Always wear safety glasses.
Double insulation
This Product is
UL listed and CSA certified
R
