Hilti TE 500-X, Operating Instructions Manual

Page: 11 / 20

English 7
Vibration information
TE 500-X
Chiseling (a
h,Cheq
) 15.3 m/s²
Uncertainty (K)
1.5 m/s²
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2 Fitting the accessory tool
1. Apply a little grease to the connection end of the accessory tool.
➥ Use only genuine Hilti grease. Use of the wrong grease can result in damage to the tool.
2. Pull the accessory tool release ring back and hold it securely.
3. Push the accessory tool into the chuck as far as it will go and then release the ring.
4. After fitting the accessory tool, grip it and pull it firmly in order to check that it is securely engaged.
➥ The product is ready for use.
5.3 Removing the accessory tool
▶
Pull the accessory tool locking ring back as far as it will go and remove the accessory tool.
Printed: 04.07.2019 | Doc-Nr: PUB / 5368075 / 000 / 03