Hilti TE 50-AVR, Manual

Page: 23 / 174

*2102965*
2102965 English 17
1. Apply a little grease to the connection end of the accessory tool.
2. Push the accessory tool into the chuck as far as it will go (until it engages).
◁
The product is ready for use.
3. Pull the chuck back as far as it will go and remove the accessory tool.
Use only the recommended grease supplied by Hilti . Use of unsuitable grease may cause damage
to the product.
5.2 Types of work
ATTENTION
Risk of damage by incorrect handling!
▶
Do not operate the switches for direction of rotation and/or function selection during operation.
Observe the safety instructions and warnings in this documentation and on the product.
5.2.1 Drilling with hammering action (hammer drilling) 6
1. Set the function selector switch to the “Hammer drilling” position .
2. Press the drill bit against the work surface.
3. Press the control switch.
◁
The product starts.
5.3 Chisel positioning 7
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶
Do not operate the tool when the selector switch is set to “Chisel positioning”. Turn the function selector
switch until it engages in the “Chiseling” position.
The chisel can be adjusted to 24 different positions (in 15° increments). This ensures that flat chisels
and shaped chisels can always be set to the optimum working position.
1. Set the function selector switch to the “Chisel positioning” position .
2. Rotate the chisel to the desired position.
3. Turn the function selector switch until it engages in the “Chiseling” position.
◁
The product is ready for use.
5.3.1 Chiseling 8
▶
Set the function selector switch to the “Chiseling” position .
5.3.2 Switching sustained operation on and off 9
When chiseling, the on/off switch can be locked in the “on” position.
1. Push the lockbutton for continuous operation forward.
2. Press the on/off switch as far as it will go.
◁
The product then runs in sustained operating mode.
3. Push the lockbutton for continuous operation back.
◁
The product switches off.
Printed: 22.02.2018 | Doc-Nr: PUB / 5283607 / 000 / 04