![background image](http://html1.mh-extra.com/html/hilti/st-1800-a22/st-1800-a22_original-operating-instructions_2135028023.webp)
*439718*
439718
English
17
Status
Meaning
1 LED lights.
• Charge status: 10 % to 25 %
1 LED blinks, the power tool is ready for use.
• Charge status: < 10 %
1 LED blinks, the power tool is not ready for use.
• The battery has overheated.
4 LEDs blink, the power tool is not ready for use.
• The power tool is overloaded or has overheated.
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
4
Technical data
4.1
Cordless metal screwdriver
Rated voltage
21.6 V
DC
Weight in accordance with EPTA procedure 01/2003
2.5 kg
Rated speed under no load
2,000 /min
Torque
12 Nm
Socket/bit drive
1
/
4
″ hex. socket with
locking ring
Operating temperature
−17 ℃ … 60 ℃
Storage temperature range (without battery)
−20 ℃ … 70 ℃
4.2
Battery
Battery operating voltage
21.6 V
Ambient temperature
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
Battery charging starting temperature
−10 ℃ … 45 ℃
4.3
Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure. The data given represents the main applications of the electric tool.
However, if the electric tool is used for different applications, with different accessories or is poorly maintained,
the data may vary. This may significantly increase exposure over the total working period. An accurate
estimation of exposure should also take into account the times when the tool is switched off, or when it is
running but not actually being used for a job. This may significantly reduce exposure over the total working
period. Prescribe additional safety measures to protect the operator from the effects of noise and/or vibration,
such as: maintaining the tool and accessories, keeping the hands warm, reorganization of work patterns.
Noise emission values determined in accordance with EN 62841
Sound (power) level (L
WA
)
81 dB(A)
Uncertainty for the sound power level (K
WA
)
3 dB(A)
Emission sound pressure level (L
pA
)
70 dB(A)
Uncertainty for the sound pressure level (K
pA
)
3 dB(A)
Total vibration (vector sum of three directions), measured in accordance with EN 62841
Screwdriving (a
n
)
0.5 m/s²
Uncertainty for screwdriving (K)
1.5 m/s²
Printed: 10.08.2018 | Doc-Nr: PUB / 5070730 / 000 / 05
Summary of Contents for ST 1800-A22
