![background image](http://html1.mh-extra.com/html/hilti/sr-30/sr-30_operating-instructions-manual_2136404021.webp)
*2243029*
2243029
English
15
▶
When cutting through pipes, hold the power tool above the level of the pipe you are cutting through.
▶
The power tool is not protected against ingress of moisture. Liquid running out of a pipe can cause a
short circuit in the power tool.
▶
Never cut into unknown materials and make sure the path of the saw is free of obstructions above and
below the workpiece.
▶
The power tool can kick back if the saw blade comes into contact with an obstructing object.
▶
Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶
Engage the transport lock before storing or transporting the power tool.
▶
Comply with the manufacturer's instructions for handling and storing saw blades.
▶
The user and persons in the vicinity must wear suitable protective goggles, a hard hat, ear defenders,
protective gloves and light respiratory protection while the power tool is in use.
▶
Always use a saw blade of appropriate length. The saw blade must over the workpiece while the complete
Hubs stroke.
▶
Take breaks between working and do relaxation and finger exercises to improve the blood circulation in
your fingers.
▶
Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons’ faces. Risk of dazzling or eye damage.
▶
Flying fragments can injure the body and eyes. Wear your personal protective equipment and always
wear protective glasses and protective gloves.
▶
If work involves break-through, always secure the area on the side opposite where the work is carried
out.
▶
Always use saw blades that project at least 40 mm beyond the workpiece over the entire length of the
blade stroke. This can help to avoid violent kickback.
3
Description
3.1
Product overview
@
Blade holder
;
Mount for cutting assist
=
Folding scaffold hook (accessory)
%
Control switch
&
Rear grip
(
Electric supply cable
)
Attachment eye for lanyard
+
Front gripping area with unlocking/locking
button of the contact shoe
§
Saw blade release lever
/
Suction hose connector (accessory)
:
Contact shoe
∙
Saw blade
$
Cutting assist (accessory)
Summary of Contents for SR 30
