![background image](http://html.mh-extra.com/html/hilti/sl-6-a22/sl-6-a22_manual_2135540008.webp)
4
English
2195847
*2195847*
3.2 Intended use
The product described is a cordless floodlight. It is for lighting up jobsites.
The lamp head can be pivoted horizontally and vertically. Additionally, the
light can be set on a flat surface, suspended from various construction
materials by means of the integral hook, or mounted on a tripod with 5/8"
thread.
▶
Use only
Hilti
Liion batteries of the B 22 series with this product.
▶
Use only the
Hilti
battery chargers of the C4/36 series to charge these
batteries.
3.3 Charge state indicator
Lightly press (no more than until resistance is perceptible) either of the
battery release buttons to check the charge state of the Liion battery.
Status
Meaning
4 LEDs light up.
• Charge state: 75 % to 100 %
3 LEDs light up.
• Charge state: 50 % to 75 %
2 LEDs light up.
• Charge state: 25 % to 50 %
1 LED lights up.
• Charge state: 10 % to 25 %
1 LED flashes.
• Charge state: < 10 %
If the LEDs of the charge state indicator flash, follow the instructions in
the 'Troubleshooting' section.
3.4 Items supplied
Cordless lamp, operating instructions.
Other system products approved for use with this product can be found at
your local
Hilti Store
or online at:
www.hilti.group
| USA:
www.hilti.com
3.5 4-mode switch
Use the 4-mode switch to set brightness.
Status
Meaning
Press once
• The lamp shines at maximum
brightness (100 %).
Press twice
• The lamp shines at reduced
brightness (66 %).
Press three times
• The lamp shines at reduced
brightness (33 %).
Press and hold down for several
seconds
• The lamp is off.
Printed: 23.10.2018 | Doc-Nr: PUB / 5459250 / 000 / 00