Hilti SIW 18T-A, Operating Instructions Manual, Page: 11 / 24

en
3
Symbols
Return materials for
recycling
Direct current Rated speed under
no load
Revolutions per
minute
Revolutions per
minute
Location of identification data on the power tool
The type designation can be found on the type identification plate and the
serial number on the side of the motor housing. Make a note of this data in
your operating instructions and always refer to it when making an enquiry to
your Hilti representative or service department.
Type:
Generation: 01
Serial no.:
2 Safety instructions
NOTE
The safety rules given in the following section contain all general safety rules
for power tools which, in accordance with the applicable standards, require
to be listed in the operating instructions. Accordingly, some of the rules
listed may not be relevant to this tool.
2.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Printed: 20.05.2015 | Doc-Nr: PUB / 5136087 / 000 / 03