English
7
3.3 Items supplied
Drill / driver, side handle, operating instructions.
You can find other system products approved for your product at your local
Hilti
Center or online at:
www.hilti.com
3.4 Li-ion battery state of charge display
The Li-ion battery state of charge and malfunctions of the power tool are
indicated by the display on the Liion battery. The Liion battery state of
charge is displayed after pressing one of the two battery release buttons.
Status
Meaning
4 LEDs light.
• Charge state: 75 % to 100 %
3 LEDs light.
• Charge state: 50 % to 75 %
2 LEDs light.
• Charge state: 25 % to 50 %
1 LED lights.
• Charge state: 10 % to 25 %
1 LED blinks, the power tool is
ready for use.
• Charge state: < 10 %
1 LED blinks, the power tool is not
ready for use.
• The battery has overheated.
4 LEDs blink, the power tool is not
ready for use.
• The power tool has overheated or
is overloaded.
Note
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery charge state LEDs blink, please refer to the information
given in the Troubleshooting section.
3.5 Indication of overloading and overheating
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
4 Technical data
4.1 Drill/driver
SF 6H-A22
Rated voltage
21.6 V
DC
Weight
4.4 lb
(2.0 kg)
Printed: 01.02.2017 | Doc-Nr: PUB / 5329068 / 000 / 00
