Hilti SF 4-A22, Manual

Page: 20 / 332

14 English 2253606
*2253606*
7 Transport and storage
7.1 Transport and storage of cordless tools
Transport
CAUTION
Accidental starting during transport !
▶
Always transport your products with the batteries removed!
▶
Remove the battery.
▶
Never transport batteries in bulk form (loose, unprotected).
▶
Check the tool and batteries for damage before use after long periods of
transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶
Always store your products with the batteries removed!
▶
Store the tool and batteries in a place that is as cool and dry as possible.
▶
Never store batteries in direct sunlight, on heating units or behind a
window pane.
▶
Store the tool and batteries in a place where they cannot be accessed by
children or unauthorized persons.
▶
Check the tool and batteries for damage before use after long periods of
storage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, contact Service.
Trouble or fault Possible cause Action to be taken
The power tool does
not work.
The battery is not fully
inserted.
▶
Push the battery in
until it engages with
an audible click.
Low battery.
▶
Change the battery
and charge the empty
battery.
The control switch
cannot be pressed,
or is stuck.
The forward/reverse
selector switch is in the
middle position.
▶
Push the
forward/reverse
switch to the left or
right.
The battery runs
down more quickly
than usual.
Very low ambient tem-
perature.
▶
Allow the battery to
warm up slowly to
room temperature.