2. Description
2.1 Use of the product as directed
The power tool is a hand-held, cordless circular saw.
The tool is designed for cutting metals or metal-like materials up to a cutting depth of 57 mm.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
Modification of the power tool or tampering with its parts is not permissible.
The use of saw blades not in compliance with the given specification (e.g. diameter, thickness) or the use of
cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible.
Do not use the saw to cut wood or wood-like materials, plastics, gypsum board, gypsum fiberboard and
composite materials.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
2.2 Switch
On / off switch with switch-on interlock
2.3 Grips
Grip and auxiliary grip
2.4 Safety precautions
Blade guard and pivoting guard
2.5 Lubrication
Grease lubrication
2.6 Protection against overload and overheating
The power tool is equipped with an electronic protection system to prevent overloading and overheating. The
power tool switches itself off automatically in the event of overloading and overheating. After releasing the on
/ off switch, the power tool may not restart immediately when the switch is pressed again (while the power
tool is cooling down).
2.7 Lithium
‑
ion battery charge status
When a lithium-ion battery is used, the charge status can be indicated by gently pressing one of the battery
release buttons (press until resistance is felt - do not release the battery). The display on the rear of the battery
provides the following information:
LEDs light constantly
LEDs blink
Charge status C
LED 1,2,3,4
-
C
≧
75 %
LED 1,2,3
-
50 %
≦
C < 75 %
LED 1,2
-
25 %
≦
C < 50 %
en
3
Summary of Contents for SCM 18-A
Page 3: ...4 6 2 3 5...
