![background image](http://html.mh-extra.com/html/hilti/sbt-4-a22/sbt-4-a22_manual_2136016009.webp)
***** For internal use only ***** 29.08.2017 / 15:43:17 - H2\DOK-Projekt\System\SBT_4-A22\ENU\SBT_4_P1
English
7
=
Function setting ring
%
Gear selector switch
&
Forward/reverse selector switch with safety
lock
(
Control switch (with electronic speed
control)
)
Grip
+
Release buttons with additional function
(state of charge display activation)
§
Rating plate
/
Belt hook (optional)
:
State of charge and fault display (Li-ion
battery)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
▶
Use only
Hilti
Li-ion batteries of the B18 / B22 series with this product.
▶
Use only the
Hilti
battery chargers of the C4/36 series for these batteries.
3.3 Li-ion battery state of charge display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Liion battery. The charge state of the Liion battery is displayed after pressing one of the two battery
release buttons.
Status
Meaning
4 LEDs light.
• State of charge: 75 % to 100 %
3 LEDs light.
• State of charge: 50 % to 75 %
2 LEDs light.
• State of charge: 25 % to 50 %
1 LED lights.
• State of charge: 10 % to 25 %
1 LED blinks, the power tool is ready for use.
• State of charge: < 10 %
1 LED blinks, the power tool is not ready for use.
• The battery has overheated or is completely
discharged.
4 LEDs blink, the power tool is not ready for use.
• The power tool is overloaded or has overheated.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
3.4 Items supplied
Drill / driver, operating instructions.
• Other system products approved for use with this product can be found at your local
Hilti
Center or
online at:
www.hilti.group
4 Technical data
4.1 Drill/driver
Rated voltage
21.6 V
Weight in accordance with EPTA procedure 01
2.52 kg
Speed
1st gear
0 /min …370 /min
2nd gear
0 /min …2,140 /min
Torque (soft joint)
≤ 50 Nm
Torque range (15 settings)
2 Nm …12 Nm
Ø keyless chuck diameter range
1.5 mm …13 mm
Ø drill bit (metal)
1.5 mm …13 mm
Ø drill bit (hardwood)
1.5 mm …20 mm
Ø drill bit (softwood)
1.5 mm …32 mm
Printed: 29.08.2017 | Doc-Nr: PUB / 5356251 / 000 / 01