Hilti RT 6-A22, Manual, Page: 22 / 168

18 English 2225140
*2225140*
Noise information
RT 6-A22
Sound power level LWA 98.9 dB(A)
Uncertainty for the sound power level KWA 3 dB(A)
Emission sound pressure level LpA 85.9 dB(A)
Uncertainty for the sound pressure level KpA 3 dB(A)
Vibration information
RT 6-A22
Vibration value ah,D 0.94 m/s²
Uncertainty for the given vibration value K 0.033 m/s²
4.3 Table correlating nosepieces and blind rivets to be used
Nosepiece designation Blind rivet diameter, all commercially available
materials
RTN 2.4 2.4 mm
RTN 3.2 3.2 mm
RTN 4.0 4.0 mm
RTN 4.8 4.8 mm
5.0 mm (aluminum blind rivets only)
5 Preparations at the workplace
5.1 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.1.2 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶
Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶
Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
5.1.3 Removing the battery
1. Press the battery release buttons.
2. Remove the battery from the tool.
Printed: 30.07.2019 | Doc-Nr: PUB / 5466619 / 000 / 02