Hilti PR 30-HVS A12, Manual

Page: 32 / 362

26 English
PR 30-HVS A12
Protection class in accordance with IEC 60529 (except
battery and battery compartment)
IP66
Plumb beam Constant beam, perpendicular to the
plane of rotation
4.2 Technical data for the laser receiver
Indicator range, distance from zero ±52 mm
Laser plane display range ±0.5 mm
Length of the detection area ≤ 120 mm
Center indication from top edge of casing 75 mm
Time without detection before automatic power off 15 min
Range of remote control unit (diameter) for the PR 30-
HVS
2 m … 150 m
Drop test height in the PRA 30 laser receiver holder
(under standard ambient conditions in accordance with
MIL­STD­810G)
2 m
Operating temperature −20 ℃ … 50 ℃
Storage temperature −25 ℃ … 60 ℃
Weight (including batteries) 0.25 kg
Protection class in accordance with IEC 60529 (except
battery compartment)
IP66
5 Operating the rotating laser
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Remove the battery before making any adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2 Handling the laser and battery correctly 5
Note
The B12 battery has no protection class. Do not expose the battery to rain or wet conditions.
In accordance with the Hilti instructions, the battery may be used only with the associated product
and must be inserted in the battery compartment for this purpose.
1. Fig. 1: Working in horizontal mode.
2. Fig. 2: In inclined plane mode, the laser should be lifted at the control panel side.
3. Fig. 3: Laying down or transporting in an inclined position. Working in the vertical plane.
◁
Hold the laser so that the battery compartment does NOT face upwards, so that no moisture can
enter.
5.3 Inserting / removing the battery 6
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶
Check that the contacts on the battery and on the tool are free from foreign objects before inserting
the battery.
Printed: 10.11.2016 | Doc-Nr: PUB / 5301171 / 000 / 01