![background image](http://html1.mh-extra.com/html/hilti/pma-31/pma-31_operating-instructions-manual_2135834013.webp)
For EC countries only
Do not dispose of electronic measuring tools or appliances together with household waste.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations.
9 Manufacturer’s warranty - tools
Please contact your local Hilti representative if you have
questions about the warranty conditions.
10 FCC statement (applicable in USA)
CAUTION
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radiofrequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the distance between the equipment and re-
ceiver.
Consult the dealer or an experienced TV/radio technician
for assistance.
NOTE
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
11 EC declaration of conformity (original)
Designation:
Laser receiver
Type:
PMA 31
Generation:
01
Year of design:
2009
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
until 19th April 2016: 2004/108/EC, from 20th April 2016:
2014/30/EU, 2011/65/EU, EN ISO 12100.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini
Edward Przybylowicz
Head of BA Quality and Process Man-
agement
Head of BU Measuring Systems
Business Area Electric Tools & Ac-
cessories
BU Measuring Systems
06/2015
06/2015
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
11