![background image](http://html1.mh-extra.com/html/hilti/nuron-vc-10h-22/nuron-vc-10h-22_manual_2135804028.webp)
24
English
2330315
*2330315*
VC 10L-22
Additionally in the case of L-class vacuum cleaners
▶
The Dust Class L vacuum cleaner is suitable for vacuuming up dry, non-flammable dusts, wood
shavings and hazardous dusts with an exposure limit value of > 1 mg/m³.
The vacuum cleaner must
be equipped with suitable filters corresponding to the hazard classification of the dusts to be
vacuumed up.
VC 10M-22
Additionally in the case of M-class vacuum cleaners
▶
The Dust Class M vacuum cleaner is suitable for vacuuming up dry, non-flammable dusts, wood
shavings and hazardous dusts with an exposure limit value ≧ 0.1 mg/m³.
The vacuum cleaner must
be equipped with suitable filters corresponding to the hazard classification of the dusts to be
vacuumed up.
VC 10H-22
Additionally in the case of H-class vacuum cleaners
▶
The Class H vacuum cleaner is suitable for vacuuming up dry, non-flammable dusts, wood shavings
and hazardous dusts of dust class H in accordance with EN 60335-2-69.
Operate the vacuum
cleaner exclusively with filter when vacuuming up class H hazardous dusts.
▶
Do not use the vacuum cleaner to wet-vacuum hazardous substances.
▶
This vacuum cleaner contains dust that is hazardous to health!
Only authorized specialists with
suitable personal protective equipment are permitted to carry out maintenance work and emptying,
or removal, of dust collection containers such as a dust bag, for example.
▶
Collected dust must be transported in dust-tight containers. Transfer of dust from one container
to another is not permissible.
Waste must be disposed of in accordance with the regulations and
rules for waste disposal.
▶
Once removed, the main filter element cannot be re-used. Only persons with expert knowledge
are permitted to replace permanently installed filters and the work must be carried out in a
suitable environment, e.g. at a decontamination station.
Dispose of the used filter in accordance
with the applicable regulations.
2.4
Battery use and care
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶
Never use recycled or repaired batteries.
▶
Never use the battery or a battery-operated power tool as a striking tool.
▶
Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶
Do not use or store the battery in explosive environments.
Summary of Contents for NURON VC 10H-22
