Hilti NURON SF 6-22, Original Operating Instructions

Page: 15 / 192

*2275219*
2275219 English 9
SF 6-22 SF 6H-22
Sound power level (L
WA
) 85.5 dB(A) 105.5 dB(A)
Uncertainty for the sound power level (K
WA
) 5 dB(A) 5 dB(A)
Total vibration
SF 6-22 SF 6H-22
Vibration emission value for
drilling in metal (a
h,D
)
B 22­85 1.0 m/s² 1.2 m/s²
B 22­170 0.7 m/s² 1.1 m/s²
Uncertainty for drilling in metal (K) 1.5 m/s² 1.5 m/s²
Vibration emission value for
hammer-action drilling in
concrete (a
h,ID
)
B 22­85 •/• 11.9 m/s²
B 22­170 •/• 10.6 m/s²
Uncertainty for hammer-action drilling in concrete
(K)
•/• 1.5 m/s²
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 6
5.2 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶
Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶
Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.3 Removing the battery
1. Press the battery release button.
2. Remove the battery from the product.
5.4 Installing the side handle 2
CAUTION
Risk of injury! Loss of control over the rotary hammer drill.
▶
Check that the side handle is fitted correctly and tightened securely. Make sure that the clamps are
correctly seated in the grooves provided for the purpose.
1. Turn the grip to release the clamps of the side handle.
2. Seat the side handle clamping band fully on the housing and push the clamps into the grooves provided
for the purpose.
3. Turn the grip to tension the clamps of the side handle.