Hilti NURON SF 6-22, Original Operating Instructions

Page: 11 / 192

*2275219*
2275219 English 5
▶
Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone
and other products containing silicates; certain types of wood, such as oak, beech and chemically
treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and
bystanders by means of the hazard classification of the materials to be worked. Implement the necessary
measures to restrict exposure to a safe level, for example by the use of a dust collection system or by
the wearing of suitable respiratory protection. The general measures for reducing exposure include:
▶
working in an area that is well ventilated,
▶
avoidance of prolonged contact with dust,
▶
directing dust away from the face and body,
▶
wearing protective clothing and washing exposed areas of the skin with water and soap.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶
If the work involves breaking right through, take the appropriate safety measures on the opposite side.
Parts breaking away could fall out and / or fall down and injure other persons.
▶
The product can affect your balance when wall break-through occurs suddenly. Make sure you have
a firm footing and keep your balance when you do break-through work on walls or ceilings.
▶
Do not use blunted bits.
▶
Use auxiliary grips supplied with the product. Loss of control can cause personal injury. Make sure that
the auxiliary grip is firmly seated and securely installed.
▶
Switch the product on only after you have brought it to the working position.
▶
Always hold the tool with both hands on the grips provided. Keep the grips clean and dry.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶
Do not touch rotating parts – risk of injury!
▶
Wear eye protection, a hard hat and ear protection and suitable respiratory protection while the product
is in use.
▶
Wear eye protection. Flying fragments can injure the body and eyes.
▶
Do not look directly into the light source (LED) of the product and do not aim the beam at other persons’
faces. Risk of dazzling or eye damage.
▶
Take frequent breaks and do physical exercises to improve the blood circulation in your fingers. High
vibration during long periods of work can lead to disorders of the blood vessels and nervous system in
the fingers, hands and wrists.
▶
Wait until the product has come to a complete stop before you lay it down.
▶
Wear protective gloves when changing the accessory tool. Touching the accessory tool can result in
cuts and burns.
2.4 Battery use and care
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶
Never use recycled or repaired batteries.
▶
Never use the battery or a battery-operated power tool as a striking tool.
▶
Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶
Do not use or store the battery in explosive environments.