*2264106*
2264106
English 21
Storage
WARNING
Accidental damage caused by defective or leaking batteries
!
▶
Always store your products with the batteries removed!
▶
Store the product and the batteries in a cool and dry place. Comply with
the temperature limits stated in the technical data.
▶
Do not store batteries on the charger. Always remove the battery from
the charger when the charging operation has completed.
▶
Never leave batteries in direct sunlight, on sources of heat, or behind
glass.
▶
Store the product and batteries where they cannot be accessed by
children or unauthorized persons.
▶
Prior to each use and before and after prolonged storage, check the
product and the batteries for damage.
9
Troubleshooting
If a problem occurs, always observe the status indicator of the battery. See
the section headed
Status indicators of the Liion battery
.
If the trouble you are experiencing is not listed in this table or you are unable
to rectify the problem by yourself, contact
Hilti
Service.
Trouble or fault
Possible cause
Action to be taken
LEDs of the battery
show nothing
Battery defective
▶
Contact
Hilti
Service.
The on/off button
cannot be pressed,
i.e. the button is
locked.
Not a fault (safety func-
tion).
▶
Press the transport
lock.
Running speed sud-
denly drops consid-
erably.
Battery is discharged.
▶
Charge the battery.
Saw advance pressure
is too high.
▶
Reduce advance
pressure and switch
the power tool back
on.
Chips are not trans-
ported away; they
drop on to the base
plate
The chip / dust channel
is blocked.
▶
Clean the chip / dust
channel.
The battery runs
down more quickly
than usual.
Battery condition is not
optimal.
▶
Replace the battery.
Summary of Contents for NURON SC 30WL-22
