Hilti NURON SBT 4--22, Operating Instructions Manual

Page: 10 / 32

6 English 2306835
*2306835*
3 Description
3.1 Product overview 1
@
Keyless chuck
;
Torque and operating mode selector ring
=
Gear selector switch
%
Forward/reverse switch with transport lock
&
Grip
(
Installation opening for accessories
)
Battery
+
Work-area light (LED)
§
Control switch with electronic speed control
/
Battery release button
:
Battery status indicator
3.2 Intended use
The product described is a hand-held cordless drill / driver. It is designed for driving and removing screws,
for drilling in metal, wood and plastic.
• For this product, use only
Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Drill / driver, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶
If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.