Hilti NURON GTB 6X-22, Manual

Page: 31 / 288

*2327538*
2327538 English 25
7.3 Changing the guard 7
The guard protects the gear head from damage by the abrasive belt. It can be replaced when worn.
1. Remove the abrasive belt. → page 22
2. Remove the drive roller. → page 24
3. Remove the securing screws and lift off the guard.
4. Hold the new guard in position, install the securing screws and tighten them to the specified torque.
Technical data
Tightening torque, securing screws for guard 2.4 Nm
5. Install the drive roller.
7.4 Changing the guide roller / relay roller 8
The guide roller and relay roller can be replaced when worn or damaged.
1. Remove the abrasive belt. → page 22
2. Remove the securing screw and remove the roller. If necessary, use an open-ended wrench to lock the
shaft.
3. Insert the new roller and install the securing screw.
4. Lock the shaft with an open-ended wrench and tighten the securing screw to the specified torque.
Technical data
Tightening torque, securing screw for guide roller⁄relay roller 8 Nm
8 Transport and storage of cordless tools and batteries
Transport
CAUTION
Accidental starting during transport !
▶
Always transport your products with the batteries removed!
▶
Remove the battery/batteries.
▶
Never transport batteries loose and unprotected. During transport, batteries should be protected from
excessive shock and vibration and isolated from any conductive materials or other batteries that may
come in contact with the terminals and cause a short circuit. Comply with the locally applicable
regulations for transporting batteries.
▶
Do not send batteries through the mail. Consult your shipper for instructions on how to ship undamaged
batteries.
▶
Prior to each use and before and after prolonged transport, check the product and the batteries for
damage.
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
▶
Always store your products with the batteries removed!
▶
Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated in
the technical data.
▶
Do not store batteries on the charger. Always remove the battery from the charger when the charging
operation has completed.
▶
Never leave batteries in direct sunlight, on sources of heat, or behind glass.
▶
Store the product and batteries where they cannot be accessed by children or unauthorized persons.
▶
Prior to each use and before and after prolonged storage, check the product and the batteries for
damage.